A major consumer of Industrial minerals, the Ceramic industry (especially Asia) uses Talc for “body” and glazing of: Wall tiles, Sanitary Ware, Electrical Insulating (Steatite Talc) Porcelain Dinner Ware. The talc used is generally of 80 ~ 93% whiteness and 200 – 300 mesh.

   The formation of enstatite as talc disassociates during firing produces high thermal expansion bodies, which results in glazes being put into compression and thereby minimizes crazing. Low moisture expansion bodies are produced, which results in good resistance to delayed crazing. The massive nature of the talc aids in dry pressing and in preparation of good casting slips. Low firing temperatures are possible. The shrinkage and absorption properties of bodies are fairly constant over a wide temperature range. Good white fire bodies are possible. Glazes of unusual brilliance and attractiveness can be fitted readily to high-talc bodies.

   Talc is also used in steatite bodies, which are manufactured into high-frequency electric insulators, a segment of the ceramic white wares market. A minor use of talc is as an additive in dinnerware bodies composed of clay, flint and feldspar. Compromising as much as 6% of such bodies, Omcera provides greatly improved craze resistance.   Next Page